This guide explains how Spree represents shipping options and how it calculates expected costs, and shows how you can configure the system with your own shipping methods. After reading it you should know:

  • how shipments and shipping are implemented in Spree
  • how to specify your shipping structure
  • how split shipments work
  • how to configure products for special shipping treatment
  • how to capture shipping instructions

Spree uses a very flexible and effective system to calculate shipping, accommodating the full range of shipment pricing: from simple flat rate to complex product-type- and weight-dependent calculations.

The Shipment model is used to track how items are delivered to the buyer.

Shipments have the following attributes:

AttributeDescriptionExample Value
numberThe unique identifier for this shipment. It begins with the letter H and ends in an 11-digit number. This number is shown to the users, and can be used to find the order by calling Spree::Shipment.find_by(number: number).H12345678901
trackingThe identifier given for the shipping provider i.e. FedEx, UPS, etc.1Z999AA10123456784
shipped_atThe time when the shipment was shipped.2021-07-21T14:36:00.000Z
stateThe current state of the shipment.shipped
stock_location_idThe ID of the Stock Location where the items for this shipment will be sourced from.3

A shipment can go through many different states, as illustrated below.

An explanation of the different states:



The shipment has backordered inventory units and/or the order is not paid for.



The shipment has no backordered inventory units and the order is paid for.



The shipment is on its way to the buyer.



When an order is cancelled, all of its shipments will also be cancelled. When this happens, all items in the shipment will be restocked. If an order is “resumed”, then the shipment will also be resumed.

Explaining each piece of the shipment world inside of Spree separately and how each piece fits together can be a cumbersome task. Fortunately, using a few simple examples makes it much easier to grasp. In that spirit, the examples are shown first in this guide.


Simple Setup

Consider you sell T-shirts to the US and Europe and ship from a single location, and you work with 2 deliverers:

  • USPS Ground to US
  • FedEx to EU

and their pricing is as follow:

  • USPS charges 5foroneTshirtand5 for one T-shirt and 2 for each additional one
  • FedEx charges $10 each, regardless of the quantity

To achieve this setup you need the following configuration:

  • Shipping Categories: All your products are the same, so you only need to define one default shipping category. Each of your products would then need to be assigned to this shipping category.
  • 1 Stock Location: You are shipping all items from the same location, so you can use the default.
  • 2 Shipping Methods Configuration->Shipping Methods as follows:
USPS GroundUSFlexi Rate5,5,2

Advanced Setup

Consider you sell products to a single zone US and you ship from 2 locations Stock Locations:

  • New York
  • Los Angeles

and you work with 3 deliverers Shipping Methods:

  • FedEx
  • DHL
  • US postal service

and your products can be classified into 3 Shipping Categories:

  • Light
  • Regular
  • Heavy

and their pricing is as follow:

FedEx charges:

  • $10 for all light items regardless of how many you have
  • $2 per regular item
  • 20forthefirstheavyitemand20 for the first heavy item and 15 for each additional one

DHL charges:

  • $5 per item if it’s light or regular
  • $50 per item if it’s heavy

USPS charges:

  • $8 per item if it’s light or regular
  • $20 per item if it’s heavy

To achieve this setup you need the following configuration:

  • 4 Shipping Categories: Default, Light, Regular and Heavy
  • 3 Shipping Methods Configuration->Shipping Methods: FedEx, DHL, USPS
  • 2 Stock Locations Configuration->Stock Locations: New York, Los Angeles
S. Category / S. MethodDHLFedExUSPS
LightPer Item $5Flat Rate $10Per Item $8
RegularPer Item $5Per Item $2Per Item $8
HeavyPer Item $50Flexi Rate20,20,15Per Item $20

Design & Functionality

To properly leverage Spree’s shipping system’s flexibility you must understand a few key concepts:

  • Shipping Methods
  • Zones
  • Shipping Categories
  • Calculators through Shipping Rates

Shipping Methods

Shipping methods are the actual services used to send the product. For example:

  • UPS Ground
  • UPS One Day
  • FedEx 2Day
  • FedEx Overnight
  • DHL International

Each shipping method is only applicable to a specific Zone. For example, you wouldn’t be able to get a package delivered internationally using a domestic-only shipping method. You can’t ship from Dallas, USA to Rio de Janeiro, Brazil using UPS Ground a US-only carrier.

If you are using shipping categories, these can be used to qualify or disqualify a given shipping method.

Shipping methods can now have multiple shipping categories assigned to them. This allows the shipping methods available to an order to be determined by the shipping categories of the items in a shipment.


Zones serve as a mechanism for grouping geographic areas together into a single entity. You can read all about how to configure and use Zones in the Zones Guide.

The Shipping Address entered during checkout will define the zone the customer is in and limit the Shipping Methods available to him.

Shipping Categories

Shipping Categories are useful if you sell products whose shipping pricing vary depending on the type of product TVs and Mugs, for instance.

For simple setups, where shipping for all products is priced the same ie. T-shirt-only shop, all products would be assigned to the default shipping category for the store.

Some examples of Shipping Categories would be:

  • Light for lightweight items like stickers
  • Regular
  • Heavy for items over a certain weight

Shipping Categories are created in the admin interface Configuration -> Shipping Categories and then assigned to products Products -> Edit.

During checkout, the shipping categories of the products in your order will determine which calculator will be used to price its shipping for each Shipping Method.


A Calculator is the component responsible for calculating the shipping price for each available Shipping Method.

Spree ships with 5 default Calculators:

  • Flat rate per order
  • Flat rate per item/product
  • Flat percent
  • Flexible rate
  • Price sack

Flexible rate is defined as a flat rate for the first product, plus a different flat rate for each additional product.

You can define your own calculator if you have more complex needs. In that case, check out the Calculators Guide.


What the Customer Sees

In the standard system, there is no mention of shipping until the checkout phase.

After entering a shipping address, the system displays the available shipping options and their costs for each shipment in the order. Only the shipping options whose zones include the shipping address are presented.

The customer must choose a shipping method for each shipment before proceeding to the next stage. At the confirmation step, the shipping cost will be shown and included in the order’s total.

You can enable collection of extra shipping instructions by setting the option `Spree::Config.shipping_instructions` to `true`. This is set to `false` by default. See [Shipping Instructions]#shipping-instructions below.

What the Order’s Administrator Sees

Shipment objects are created during checkout for an order. Initially each records just the shipping method and the order it applies to. The administrator can update the record with the actual shipping cost and a tracking code, and may also once only confirm the dispatch. This confirmation causes a shipping date to be set as the time of confirmation.

Advanced Shipping Methods

Spree comes with a set of calculators that should fit most of the shipping situations that may arise. If the calculators that come with Spree are not enough for your needs, you might want to use an extension - if one exists to meet your needs - or create a custom one.


There are a few Spree extensions which provide additional shipping methods, including special support for fees imposed by common carriers, or support for bulk orders. See the Spree Extension Registry for the latest information.

Writing Your Own

For more detailed information, check out the section on Calculators.

Your calculator should accept an array of LineItem objects and return a cost. It can look at any reachable data, but typically uses the address, the order and the information from variants which are contained in the line_items.

Product Configuration

Store administrators can assign products to specific ShippingCategories or include extra information in variants to enable the calculator to determine results.

Each product has a ShippingCategory, which adds product-specific information to the calculations beyond the standard information from the shipment. Standard information includes:

  • Destination address
  • Variants and quantities
  • Weight and dimension information, if given, for a variant

ShippingCategory is basically a wrapper for a string. One use is to code up specific rates, eg. “Fixed 20"or"Fixed20" or "Fixed 40”, from which a calculator could extract imposed prices and not go through its other calculations.

Variant Configuration

Variants can be specified with weight and dimension information. Some shipping method calculators will use this information if it is present.

Filtering Shipping Methods On Criteria Other Than the Zone

Ordinarily, it is the zone of the shipping address that determines which shipping methods are displayed to a customer at checkout. Here is how the availability of a shipping method is determined:

class Spree::Stock::Estimator
  def shipping_methods(package)
    shipping_methods = package.shipping_methods
    shipping_methods.delete_if { |ship_method| !ship_method.calculator.available?(package.contents) }
    shipping_methods.delete_if { |ship_method| !ship_method.include?(order.ship_address) }
    shipping_methods.delete_if { |ship_method| !(ship_method.calculator.preferences[:currency].nil? || ship_method.calculator.preferences[:currency] == currency) }

Unless overridden, the calculator’s available? method returns true by default. It is, therefore, the zone of the destination address that filters out the shipping methods in most cases. However, in some circumstances it may be necessary to filter out additional shipping methods.

Consider the case of the USPS First Class domestic shipping service, which is not offered if the weight of the package is greater than 13oz. Even though the USPS API does not return the option for First Class in this instance, First Class will appear as an option in the checkout view with an unfortunate value of 0, since it has been set as a Shipping Method.

To ensure that First Class shipping is not available for orders that weigh more than 13oz, the calculator’s available? method must be overridden as follows:

class Calculator::Usps::FirstClassMailParcels < Calculator::Usps::Base
  def self.description
    "USPS First-Class Mail Parcel"

  def available?(order)
    multiplier = 1.3
    weight = order.line_items.inject(0) do |weight, line_item|
      weight + (line_item.variant.weight ? (line_item.quantity * line_item.variant.weight * multiplier) : 0)
    #if weight in ounces > 13, then First Class Mail is not available for the order
      weight > 13 ? false : true

Split Shipments


Split shipments are a feature for more complex Spree applications that require sophisticated shipping and warehouse logic. This includes detailed inventory management and allows for shipping from multiple locations.

Creating Proposed Shipments

This section steps through the basics of what is involved in determining shipments for an order. There are a lot of pieces that make up this process. They are explained in detail in the Components of Split Shipments section of this guide.

The process of determining shipments for an order is triggered by calling create_proposed_shipments on an Order object while transitioning to the delivery state during checkout. This process will first delete any existing shipments for an order and then determine the possible shipments available for that order.

create_proposed_shipments will initially call Spree::Stock::Coordinator.new(@order).packages. This will return an array of packages. In order to determine which items belong in which package when they are being built, Spree uses an object called a Splitter, described in more detail below.

After obtaining the array of available packages, they are converted to shipments on the order object. Shipping rates are determined and inventory units are created during this process as well.

At this point, the checkout process can continue to the delivery step.

Components of Split Shipments

This section describes the four main components that power split shipments: The Coordinator, The Packer, The Prioritizer, and The Estimator.

The Coordinator

The Spree::Stock::Coordinator is the starting point for determining shipments when calling create_proposed_shipments on an order. Its job is to go through each StockLocation available and determine what can be shipped from that location.

The Spree::Stock::Coordinator will ultimately return an array of packages which can then be easily converted into shipments for an order by calling to_shipment on them.

The Packer

A Spree::Stock::Packer object is an important part of the create_proposed_shipments process. Its job is to determine possible packages for a given StockLocation and order. It uses rules defined in classes known as Splitters to determine what packages can be shipped from a StockLocation.

For example, we may have two splitters for a stock location. One splitter has a rule that any order weighing more than 50lbs should be shipped in a separate package from items weighing less. Our other splitter is a catch-all for any item weighing less than 50lbs. So, given one item in an order weighing 60lbs and two items weighing less, the Packer would use the rules defined in our splitters to come up with two separate packages: one containing the single 60lb item, the other containing our other two items.

Default Splitters

Spree comes with two default splitters which are run in sequence. This means that the first splitter takes the packages array from the order, and each subsequent splitter takes the output of the splitter that came before it.

Let’s take a look at what the default splitters do:

Custom Splitters

Note that splitters can be customized, and creating your own can be done with relative ease. By inheriting from Spree::Stock::Splitter::Base, you can create your own splitter.

For an example of a simple splitter, take a look at Spree’s weight based splitter. This splitter pulls items with a weight greater than 150 into their own shipment.

After creating your splitter, you need to add it to the array of splitters Spree uses. To do this, add the following to your application’s spree initializer spree.rb file:

Rails.application.config.after_initialize do
  Rails.application.config.spree.stock_splitters << Spree::Stock::Splitter::CustomSplitter

You can also completely override the splitters used in Spree, rearrange them, etc. To do this, add the following to your spree.rb file:

Rails.application.config.after_initialize do
  Rails.application.config.spree.stock_splitters = [

Or if you don’t want to split packages just set the option above to an empty array. e.g. a store with the following configuration in spree.rb won’t have any package splitted.

Rails.application.config.spree.stock_splitters = []

If you want to add different splitters for each StockLocation, you need to decorate the Spree::Stock::Coordinator class and override the splitters method.

The Prioritizer

A Spree::Stock::Prioritizer object will decide which StockLocation should ship which package from an order. The prioritizer will attempt to come up with the best shipping situation available to the user.

By default, the prioritizer will first select packages where the items are on hand. Then it will try to find packages where items are backordered. During this process, the Spree::Stock::Adjuster is also used to ensure each package has the correct number of items.

The prioritizer is also a customization point. If you want to customize which packages should take priority for the order during this process, you can override the sort_packages method in Spree::Stock::Prioritizer.

Customizing the Adjuster

The Adjuster visits each package in an order and ensures the correct number of items are in each package. To customize this functionality, you need to do two things:

  1. Subclass the Spree::Stock::Adjuster class and override the the adjust method to get the desired functionality.
  2. Decorate the Spree::Stock::Coordinator and override the prioritize_packages method, passing in your custom adjuster class to the Prioritizer initializer. For example, if our adjuster was called Spree::Stock::CustomAdjuster, we would do the following in app/my_store/spree/stock/coordinator_decorator.rb:
module Spree
  module Stock
    module CoordinatorDecorator do
      def prioritize_packages(packages)
        prioritizer = Prioritizer.new(order, packages, Spree::Stock::CustomAdjuster)


The Estimator

The Spree::Stock::Estimator loops through the packages created by the packer in order to calculate and attach shipping rates to them. This information is then returned to the user so they can select shipments for their order and complete the checkout process.